Manual Glue Stamping

The flex to assembly attachmenet can be performed with a glue stamp to transfer the glue and to vertical stamp to pick up the items to attach.

A set of jigs have been desigend based on an original design from PSI for the CMS pixel system.

The PSI manual for the BPIX module assembly http://ppewww.physics.gla.ac.uk/~batesr/BPIX_module_assembly_CMS-doc-4899.pdf shows the details of how the module was made.

A presentation on the assembly process overveiw and the adaptation of the tooling for the FEI4 quad module are given below.

• Pixel_module_assembly_tooling.pptx
• AssemblyOverview.pptx

Drawings for the Manual assembly tooling

• LC_PPE_AUG_ASM_015-_v3_Universal_stamper.PDF: top level assembly

• LC_PPE_AUG_058-v1_flex_shim.PDF: part files

• LC_PPE_AUG_067-v1_glue_stamp_plate.PDF: part files

• LC_PPE_AUG_066-v1_glue_stamp_chuck.PDF: part files

• LC_PPE_AUG_061-v1_vacuum_chuck_base.PDF: part files

• LC_PPE_AUG_060-v2_flex_vacuum_chuck.PDF: part files

• LC_PPE_AUG_062-v2_quad_vacuum_chuck.PDF: part files

• LC_PPE_AUG_068-v1_glue_reservoir.PDF: part files

• LC_PPE_AUG_063-v1_flex_pickup_chuck.PDF: part files

• LC_PPE_AUG_064-v1_flex_pickup_chuck_base.PDF: part files

• LC_PPE_AUG_065-v2_pickup_vaccum_feed.PDF: part files

• LC_PPE_AUG_058-v2_thermal_flex_shim.PDF: shim for locating component

• LC_PPE_AUG_057-v1_quad_shim.PDF: shim for locating component

-- Richard Bates - 2016-11-30

-- Liam Cunningham - 2016-11-30

Comments