Jigs

There are 2 of each jig sets: named A + B

All are labeleld with T to indicate the Top of each jig

• Jig Heights - Set up for Jig A

28th February

• First tests using Salad cream
  • Too much used
  • Glass slide not aligned to vacuum jig
  • However, x-y rotation (or lack of) looks v good

29th Feb

Picked up bad asics

Wed 7th

Used glue with glass slides

20 Glass ASICS : 0.86g

20 ASICS: 0.83g

Glass slide : 1.96g

Glass ASICS + Slide = 2.82g

After Gluing. 3.05g

Glue used = 0.23g

Notes:

• Uneven spreading using a q tip. Have now purchased glue spreaders to help even out distribution
• jig looks uneven at bottom left corner. 5 spots blurring into 1
• left vacum off
• 3pm - 10am for curing

Mon 12th

Notes

• Used glue spreader
• imotved definistion of 5 dots
• However, slides stuck to stencil insterad of vacuum

Testing

Hybrid Specific HSIO Configuration and test results

For testing hybrids it is important to use the NoBCCSetup script with the following settings:

e->ConfigureVariable(10016, 0x7883); e->Sleep(10);
e->ConfigureVariable(10023, 0x00A0); e->Sleep(10);

It is necessary to set the L1Delay in the module config file to 129 (was originally set to 132 for BCC), also the st_system_config has to be modified to use the J37 IDC on HSIO, setting s0/s1 to 2 0 respectively and the d0/d1 delays to 20.

https://twiki.cern.ch/twiki/bin/viewauth/Atlas/ShortStripsHybridLiverpool

Inventory