Thermal simulation

See this page ThermalFEA

Rectangular 3-quad Prototypes

To put here:

- concept sketches

- assembly photos

- thermal camera photos and data

- liverpool and glasgow FEA results

quad module engineering drawing: 2012-11-19_np49-04-03.pdf

hex module engineering drawing: 2012-11-19_np49-04-02.pdf

Conceptual drawings:

Below, left to right: engineering drawing of general outline /Cfibre face sheet, cooling pipe:

Below: construction photographs of (left to right): vacuum jig for gluing, one foam wedge, wedges glued to face sheet, cooling pipe samples.

This was shelved in 2013 upon adoption of the Open Rings layout - click on the heading to see archive.

Topic attachments
I	Attachment	History	Action	Size	Date	Who	Comment
pdf	2012-11-19_np49-04-02.pdf	r1	manage	106.3 K	2013-09-01 - 12:16	JoleenPater	hex module engineering drawing
pdf	2012-11-19_np49-04-03.pdf	r1	manage	106.0 K	2013-09-01 - 12:04	JoleenPater	quad module engineering drawing
jpg	ATLAS_Pixel_Single_-_Row_Half_Disk.jpg	r1	manage	80.5 K	2013-02-21 - 15:35	JoleenPater	single-row half-disk general outline / CFibre face sheet (drawing)
jpg	Back.jpg	r1	manage	42.9 K	2013-02-08 - 16:25	JoleenPater	Sketch of back side of single-row half-disk prototype
jpg	Front.jpg	r1	manage	42.0 K	2013-02-08 - 16:25	JoleenPater	Sketch of front side of single-row half-disk prototype
jpg	GluingJig.jpg	r1	manage	150.9 K	2013-02-21 - 15:36	JoleenPater	single-row half-disk gluing jig (photo)
jpg	MP12003_00_A2.jpg	r1	manage	265.3 K	2013-02-21 - 15:40	JoleenPater	single-row half-disk cooling pipe (engineering drawing)
jpg	OneFoamWedge.jpg	r1	manage	1013.9 K	2013-02-21 - 15:36	JoleenPater	one foam wedge for the single-row half-disk (photo)
jpg	Prototype-sandwich.jpg	r1	manage	633.7 K	2013-02-21 - 15:33	JoleenPater	half-disk prototype: facesheets with foam wedges glued on (photo)
jpg	PrototypePipes.jpg	r1	manage	753.7 K	2013-02-21 - 15:36	JoleenPater	prototype cooling pipes for single-row half disk (photo)

Topic revision: r7 - 2015-12-18 - RichardBates