Beetle MIP test setup

This is the strip detector test setup in room 342, which uses LHCb electronics.

Inside the test box, there is the strip detector being tested (connected to a Beetle readout chip), a beta source and a photomultiplier tube, used as a trigger.

When a beta passes through the detector and hits the PMT, the TELL1 system reads out the signal from the Beetle, and sends the data to the control PC.

LHCb sofware is used to allow the user to receive and store the TELL1 data (the Event Builder) and then decode and process the data (Vetra).

There is also an environment chamber, which can also be used to cool the detectors during testing.

Using the system

There are various Word documents available, describing how to use the system. Also, this page contains the LHCb software used with the setup, along with scripts needed to use the software.

Please note that this is a work in progress - if you have any questions or comments, please get in touch with me - d.pennicard@physics.gla.ac.uk

Guides

• MIP_testing_introduction_and_hardware_setup.doc - This gives an overview of how the whole test setup works, followed by a schematic and photos of the test setup.
• MIP_testing_Software_installation.doc - If a new user wants to run the test setup from their own login, or analyse the data files later, they need a local copy of the Event Builder and Vetra software. The software - and appropriate scripts - are available further down this page.
• MIP_testing_step_by_step.doc - Step-by-step guide to using the test setup for various tests - finding the Beetle pulse shape, taking a spectrum once the peak time of the pulse has been found, doing noise tests.
• MIP_testing_Event_builder_and_CCPC.doc - Information and troubleshooting for the Event Builder and the Credit-Card sized PC built into the TELL1. (By connecting to the CCPC from the main PC, you can control the TELL1 and program the Beetle chips.)
• MIP_testing_Vetra_user_guide.doc - Decoding and analysing the data from MIP tests using the Vetra software.

Vetra ROOT Scripts for analysing the output from Vetra are also available.

Downloads

• Vetra_Gla_Jun08.tgz - Vetra software (compressed tar file)
• EBuilder_Gla_Jun08.tgz - Event builder software (compressed tar file)
• lhcbsetup.sh - Script to setup LHCb environment variables
• vetrasetup.sh - Vetra setup script
• afterReboot.sh - First event builder setup script
• newShell.sh - Second event builder setup script

-- DavidPennicard - 30 Jul 2008