RicePaper < ATLAS/PUUKA

ATLAS/PUUKA Web>Tasks>Modules>ModuleAssembly>RicePaper (2016-11-30, RichardBates) (raw view)

---+ Rice Paper method

The jig set is very similar to that used for the stencil method. The major differences is that a layer of rice paper is loaded with adhesive and this is placed on top of the pixel assembly.

The advantage of this method over the glue stencil method is that the glue will not spill out over the bond pads, while the application is easier than with a doublesided tape method.

The following files are useful:

   * [[%ATTACHURLPATH%/gluing_atlas_note.pdf][gluing_atlas_note.pdf]]: Detailed description
   * [[%ATTACHURLPATH%/5_press_plate.dxf][5_press_plate.dxf]]: 5_press_plate.dxf
   * [[%ATTACHURLPATH%/5_press_plate.gerber.txt][5_press_plate.gerber.txt]]: 5_press_plate.gerber.txt
   * 1_base_plate.png: Drawing of Base Plate. See Attachments list below
   * 5_press_plate.png: Drawing of Press Plate. See Attachments list below
   * [[%ATTACHURLPATH%/234_laser_stencils.dxf][234_laser_stencils.dxf]]: 234_laser_stencils.dxf
   * [[%ATTACHURLPATH%/234_laser_stencils.gerber.txt][234_laser_stencils.gerber.txt]]: 234_laser_stencils.gerber.txt

-- %USERSIG{RichardBates - 2016-11-30}%

---++ Comments

<br />%COMMENT%

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who
png	1_base_plate.png	r1	manage	23.3 K	2016-11-30 - 15:26	RichardBates
dxf	234_laser_stencils.dxf	r1	manage	32.0 K	2016-11-30 - 15:26	RichardBates
txt	234_laser_stencils.gerber.txt	r1	manage	87.7 K	2016-11-30 - 15:27	RichardBates
dxf	5_press_plate.dxf	r1	manage	17.4 K	2016-11-30 - 15:26	RichardBates
txt	5_press_plate.gerber.txt	r1	manage	35.6 K	2016-11-30 - 15:26	RichardBates
png	5_press_plate.png	r1	manage	19.1 K	2016-11-30 - 15:27	RichardBates
pdf	gluing_atlas_note.pdf	r1	manage	1152.5 K	2016-11-30 - 15:25	RichardBates

Topic revision: r1 - 2016-11-30 - RichardBates

ATLAS/PUUKA