Module Flex

We will design and make a flex to work with the quad assemblies that are being produced. These will have the correct tab (or no tab) orientation to be useable for the endcap ring structure. There will also be designed a module flex that connects the modules to the end of stave card and is inbedded in the disk support structure.

Flex design files : version 1.12

• PixFlex.sch: Eagle Schematic

• PixFlex.brd: Eagle Board

• PixFlex_layout.pdf: Pixel Flex _layout.pdf

• PixFlex_schematic.pdf: Pixel Flex _schematic.pdf

AUW_2014_tsurin.ppt: PPT on the flex from AUW April 2014

Thermal Flex

• Flex_Thermal_Report.docx: Thermal Flex design report

Disk tape information

20_02_14_Flex-tapes_for_the_ATLAS_pixel_Half_Disk.pptx: Update on Disk tape design

Quad Rigid

Quad Rigid PCB information is stored on the sharepoint and located at:

https://espace.cern.ch/atlas-project-upgrade-UK/WP1/Forms/AllItems.aspx?RootFolder=%2Fatlas%2Dproject%2Dupgrade%2DUK%2FWP1%2FPix%5FQuad%5FDocs&FolderCTID=0x0120002E98033CFF626142BE1899F87D8B6F28&View={8C524712-F3D0-4480-B753-D977C03D97EA}&InitialTabId=Ribbon%2EDocument&VisibilityContext=WSSTabPersistence

Comments

-- Richard Bates - 2014-06-18