Module_Testing < DetDev

DetDev Web>ATLASStripUpgrade>Module_Testing (2014-06-19, AndrewBlue) (raw view)

Information on module testing at Glasgow

---++ Introduction

Modules can be tested using the HSIO system in a similar fashion to hybrid testing

Below are notes that should help with this testing

Notes
   1 Testing jig must be cooled to prevent bowing
   1 IDC cable conector to the ?? connector in the HSIO
   1 The system config file is edited to to allow 2 hybrids to be read
   1 The LVDS cable feeds to the module frame via a buffer board that is powered

Misc
   * In more recent version of the DAQ, the numbering scheme for the streams changed
   * The control software for the HV for the silicon is buggy. If it crashes is sets the bias to 0V (and does not ramp down)

Topic revision: r1 - 2014-06-19 - AndrewBlue

DetDev