Difference: PixelEndcapsInTheLoILayout (1 vs. 16)

Revision 162014-06-16 - JoleenPater

Line: 1 to 1
Changed:
<
<

Sergey Burdin's "Open Rings" Endcap Layout

(Previously known by a number of different names e.g. "concentric diskettes".)

A couple of talks showing the basic idea: 2013-06-26_Burdin_Rings.pdf 2013-11-OpenRings3D-simple.png

and a later update with a more sophisticated layout: 2013-08-27_Jones_Lpool_Status.pdf.

Caculation of ring sizes (J.Pater) using spreadsheet found below:

Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI -layout disks (dimensions are in mm):

Physical outer radius of ring 2 modules: centres not corners - corners will extend further 315.2
Active outer radius of ring 2 modules: centres not corners 315.0
Active inner radius of ring 2 modules: centres not corners 274.6
Physical inner radius of ring 2 modules: centres not corners 274.4
Physical outer radius of ring 1 modules: centres not corners - corners will extend further 253.0
Active outer radius of ring 1 modules: centres not corners 252.7
active CENTRE of ring 2 modules 232.5
Active inner radius of ring 1 modules: centres not corners 212.3
Physical inner radius of ring 1 modules: centres not corners 212.1
Physical outer radius of ring 0 modules: centres not corners - corners will extend further 190.7
Active outer radius of ring 0 modules: centres not corners 190.5
Active inner radius of ring 0 modules: centres not corners 150.1
Physical inner radius of ring 0 modules: centres not corners 149.9
Number of modules per ring, rounded up to be divisible by 4 (front/back, left/right clamshell):

Ring 2: 60  
Ring 1: 48  
Ring 0: 36  
Jo's spreadsheet for calculating numbers of rings: PixelDiskDimensions.xlsx

6-Feb-2014: Peter Sutcliffe's step files for the 3 ring types: np49-04-17.stp, np49-04-19.stp, np49-04-21.stp

BELOW HERE IS OLDER INFORMATION - may no longer be relevant

Pixel Endcaps in the LoI (Cartigny) Layout
>
>

Pixel Endcaps in the LoI (Cartigny) Layout

  The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.
Line: 40 to 18
 The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf
Deleted:
<
<
META FILEATTACHMENT attachment="Disk0-3_QHH_Halfdisk.tiff" attr="" comment="Quad-Hex-Hex (QHH) Halfdisk" date="1361376790" name="Disk0-3_QHH_Halfdisk.tiff" path="Disk0-3_QHH_Halfdisk.tiff" size="96204" stream="Disk0-3_QHH_Halfdisk.tiff" tmpFilename="/usr/tmp/CGItemp28391" user="JoleenPater" version="1"
 
META FILEATTACHMENT attachment="Disk0-3_QHH_Halfdisk.jpg" attr="" comment="Quad-Hex-Hex (QHH) Halfdisk" date="1361377048" name="Disk0-3_QHH_Halfdisk.jpg" path="Disk0-3_QHH_Halfdisk.jpg" size="178779" stream="Disk0-3_QHH_Halfdisk.jpg" tmpFilename="/usr/tmp/CGItemp28473" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk4_MixedSizes.jpg" attr="" comment="Quad-Quad-Hex (QQH) disk" date="1361377278" name="Disk4_MixedSizes.jpg" path="Disk4_MixedSizes.jpg" size="159283" stream="Disk4_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28453" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk5_MixedSizes.jpg" attr="" comment="Quad-Hex (QH) disk" date="1361377311" name="Disk5_MixedSizes.jpg" path="Disk5_MixedSizes.jpg" size="140751" stream="Disk5_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28568" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PixelDiskDimensions.xlsx" attr="h" comment="" date="1378034470" name="PixelDiskDimensions.xlsx" path="PixelDiskDimensions.xlsx" size="22306" stream="PixelDiskDimensions.xlsx" tmpFilename="/usr/tmp/CGItemp18716" user="JoleenPater" version="1"
Deleted:
<
<
META FILEATTACHMENT attachment="2013-06-26_Burdin_Rings.pdf" attr="" comment="Sergey's initial talk introducing the 'concentric diskettes' layout" date="1378729666" name="2013-06-26_Burdin_Rings.pdf" path="2013-06-26_Burdin_Rings.pdf" size="336346" stream="2013-06-26_Burdin_Rings.pdf" tmpFilename="/usr/tmp/CGItemp18825" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-08-27_Jones_Lpool_Status.pdf" attr="" comment="Update from Liverpool, last half concerns the 'concentric diskettes' layout" date="1378729690" name="2013-08-27_Jones_Lpool_Status.pdf" path="2013-08-27_Jones_Lpool_Status.pdf" size="1295564" stream="2013-08-27_Jones_Lpool_Status.pdf" tmpFilename="/usr/tmp/CGItemp18893" user="JoleenPater" version="1"
 
META FILEATTACHMENT attachment="np49-04-17.stp" attr="h" comment="" date="1391698730" name="np49-04-17.stp" path="np49-04-17.stp" size="529175" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="np49-04-19.stp" attr="h" comment="" date="1391698739" name="np49-04-19.stp" path="np49-04-19.stp" size="413655" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="np49-04-21.stp" attr="h" comment="" date="1391698746" name="np49-04-21.stp" path="np49-04-21.stp" size="376710" user="JoleenPater" version="1"
Deleted:
<
<
META FILEATTACHMENT attachment="2013-11-OpenRings3D-simple.png" attr="" comment="" date="1391698988" name="2013-11-OpenRings3D-simple.png" path="2013-11-OpenRings3D-simple.png" size="189703" user="JoleenPater" version="1"
 
META TOPICMOVED by="JoleenPater" date="1402577406" from="ATLAS/PUUKA.EndcapLayoutAndEngineeringDesign" to="ATLAS/PUUKA.EndcapLayout"

Revision 152014-06-12 - JoleenPater

Line: 1 to 1
 

Sergey Burdin's "Open Rings" Endcap Layout

(Previously known by a number of different names e.g. "concentric diskettes".)

Line: 40 to 40
 The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf
Deleted:
<
<
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 1-21" date="1360332434" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" size="10153992" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" tmpFilename="/usr/tmp/CGItemp8387" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 22 to end" date="1360332535" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" size="11543912" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" tmpFilename="/usr/tmp/CGItemp8390" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Front.jpg" attr="" comment="Sketch of front side of single-row half-disk prototype" date="1360340700" name="Front.jpg" path="Front.jpg" size="42973" stream="Front.jpg" tmpFilename="/usr/tmp/CGItemp8235" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Back.jpg" attr="" comment="Sketch of back side of single-row half-disk prototype" date="1360340732" name="Back.jpg" path="Back.jpg" size="43886" stream="Back.jpg" tmpFilename="/usr/tmp/CGItemp8107" user="JoleenPater" version="1"
 
META FILEATTACHMENT attachment="Disk0-3_QHH_Halfdisk.tiff" attr="" comment="Quad-Hex-Hex (QHH) Halfdisk" date="1361376790" name="Disk0-3_QHH_Halfdisk.tiff" path="Disk0-3_QHH_Halfdisk.tiff" size="96204" stream="Disk0-3_QHH_Halfdisk.tiff" tmpFilename="/usr/tmp/CGItemp28391" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk0-3_QHH_Halfdisk.jpg" attr="" comment="Quad-Hex-Hex (QHH) Halfdisk" date="1361377048" name="Disk0-3_QHH_Halfdisk.jpg" path="Disk0-3_QHH_Halfdisk.jpg" size="178779" stream="Disk0-3_QHH_Halfdisk.jpg" tmpFilename="/usr/tmp/CGItemp28473" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk4_MixedSizes.jpg" attr="" comment="Quad-Quad-Hex (QQH) disk" date="1361377278" name="Disk4_MixedSizes.jpg" path="Disk4_MixedSizes.jpg" size="159283" stream="Disk4_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28453" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk5_MixedSizes.jpg" attr="" comment="Quad-Hex (QH) disk" date="1361377311" name="Disk5_MixedSizes.jpg" path="Disk5_MixedSizes.jpg" size="140751" stream="Disk5_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28568" user="JoleenPater" version="1"
Deleted:
<
<
META FILEATTACHMENT attachment="Prototype-sandwich.jpg" attr="" comment="" date="1361460836" name="Prototype-sandwich.jpg" path="Prototype-sandwich.jpg" size="648940" stream="Prototype-sandwich.jpg" tmpFilename="/usr/tmp/CGItemp28534" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="ATLAS_Pixel_Single_-_Row_Half_Disk.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361460901" name="ATLAS_Pixel_Single_-_Row_Half_Disk.jpg" path="ATLAS Pixel Single - Row Half Disk.jpg" size="82391" stream="ATLAS Pixel Single - Row Half Disk.jpg" tmpFilename="/usr/tmp/CGItemp28365" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="GluingJig.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361460990" name="GluingJig.jpg" path="GluingJig.jpg" size="154503" stream="GluingJig.jpg" tmpFilename="/usr/tmp/CGItemp28562" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="OneFoamWedge.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461000" name="OneFoamWedge.jpg" path="OneFoamWedge.jpg" size="1038221" stream="OneFoamWedge.jpg" tmpFilename="/usr/tmp/CGItemp28673" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PrototypePipes.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461014" name="PrototypePipes.jpg" path="PrototypePipes.jpg" size="771748" stream="PrototypePipes.jpg" tmpFilename="/usr/tmp/CGItemp28643" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="MP12003_00_A2.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461245" name="MP12003_00_A2.jpg" path="MP12003_00 A2.jpg" size="271673" stream="MP12003_00 A2.jpg" tmpFilename="/usr/tmp/CGItemp28517" user="JoleenPater" version="1"
 
META FILEATTACHMENT attachment="PixelDiskDimensions.xlsx" attr="h" comment="" date="1378034470" name="PixelDiskDimensions.xlsx" path="PixelDiskDimensions.xlsx" size="22306" stream="PixelDiskDimensions.xlsx" tmpFilename="/usr/tmp/CGItemp18716" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-06-26_Burdin_Rings.pdf" attr="" comment="Sergey's initial talk introducing the 'concentric diskettes' layout" date="1378729666" name="2013-06-26_Burdin_Rings.pdf" path="2013-06-26_Burdin_Rings.pdf" size="336346" stream="2013-06-26_Burdin_Rings.pdf" tmpFilename="/usr/tmp/CGItemp18825" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-08-27_Jones_Lpool_Status.pdf" attr="" comment="Update from Liverpool, last half concerns the 'concentric diskettes' layout" date="1378729690" name="2013-08-27_Jones_Lpool_Status.pdf" path="2013-08-27_Jones_Lpool_Status.pdf" size="1295564" stream="2013-08-27_Jones_Lpool_Status.pdf" tmpFilename="/usr/tmp/CGItemp18893" user="JoleenPater" version="1"
Line: 61 to 51
 
META FILEATTACHMENT attachment="np49-04-19.stp" attr="h" comment="" date="1391698739" name="np49-04-19.stp" path="np49-04-19.stp" size="413655" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="np49-04-21.stp" attr="h" comment="" date="1391698746" name="np49-04-21.stp" path="np49-04-21.stp" size="376710" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-11-OpenRings3D-simple.png" attr="" comment="" date="1391698988" name="2013-11-OpenRings3D-simple.png" path="2013-11-OpenRings3D-simple.png" size="189703" user="JoleenPater" version="1"
Changed:
<
<
META TOPICMOVED by="JoleenPater" date="1376430153" from="ATLAS/PUUKA.WP2PixelDiskMechanics" to="ATLAS/PUUKA.EndcapLayoutAndEngineeringDesign"
>
>
META TOPICMOVED by="JoleenPater" date="1402577406" from="ATLAS/PUUKA.EndcapLayoutAndEngineeringDesign" to="ATLAS/PUUKA.EndcapLayout"

Revision 142014-02-06 - JoleenPater

Line: 1 to 1
Changed:
<
<

Sergey Burdin's "Concentric Diskettes" Endcap Layout

>
>

Sergey Burdin's "Open Rings" Endcap Layout

 
Changed:
<
<		A couple of talks showing the basic idea: 2013-06-26_Burdin_Rings.pdf
>
>		(Previously known by a number of different names e.g. "concentric diskettes".)

A couple of talks showing the basic idea: 2013-06-26_Burdin_Rings.pdf 2013-11-OpenRings3D-simple.png

  and a later update with a more sophisticated layout: 2013-08-27_Jones_Lpool_Status.pdf.
Changed:
<
<		Caculation of diskette sizes (J.Pater) using spreadsheet found below:
>
>		Caculation of ring sizes (J.Pater) using spreadsheet found below:
 
Changed:
<
<		Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI -layout disks:
>
>		Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI -layout disks (dimensions are in mm):
 
Changed:
<
<
Physical outer radius of ring 2 modules: centres not corners - corners will extend further 315.2
Active outer radius of ring 2 modules: centres not corners 315.0 same as LoI
Active inner radius of ring 2 modules: centres not corners 274.6
Physical inner radius of ring 2 modules: centres not corners 274.4
Physical outer radius of ring 1 modules: centres not corners - corners will extend further 253.0
Active outer radius of ring 1 modules: centres not corners 252.7
active CENTRE of ring 2 modules 232.5
Active inner radius of ring 1 modules: centres not corners 212.3
Physical inner radius of ring 1 modules: centres not corners 212.1
Physical outer radius of ring 0 modules: centres not corners - corners will extend further 190.7
Active outer radius of ring 0 modules: centres not corners 190.5
Active inner radius of ring 0 modules: centres not corners 150.1 same as LoI
Physical inner radius of ring 0 modules: centres not corners 149.9
Number of modules per ring, rounded up to be divisible by 4 (front/back, left/right clamshell):
>
>
Physical outer radius of ring 2 modules: centres not corners - corners will extend further 315.2
Active outer radius of ring 2 modules: centres not corners 315.0
Active inner radius of ring 2 modules: centres not corners 274.6
Physical inner radius of ring 2 modules: centres not corners 274.4
Physical outer radius of ring 1 modules: centres not corners - corners will extend further 253.0
Active outer radius of ring 1 modules: centres not corners 252.7
active CENTRE of ring 2 modules 232.5
Active inner radius of ring 1 modules: centres not corners 212.3
Physical inner radius of ring 1 modules: centres not corners 212.1
Physical outer radius of ring 0 modules: centres not corners - corners will extend further 190.7
Active outer radius of ring 0 modules: centres not corners 190.5
Active inner radius of ring 0 modules: centres not corners 150.1
Physical inner radius of ring 0 modules: centres not corners 149.9
Number of modules per ring, rounded up to be divisible by 4 (front/back, left/right clamshell):
 
Ring 2: 60  
Ring 1: 48  
Ring 0: 36  
Jo's spreadsheet for calculating numbers of rings: PixelDiskDimensions.xlsx
Added:
>
>		6-Feb-2014: Peter Sutcliffe's step files for the 3 ring types: np49-04-17.stp, np49-04-19.stp, np49-04-21.stp
 

BELOW HERE IS OLDER INFORMATION - may no longer be relevant

Pixel Endcaps in the LoI (Cartigny) Layout
Line: 53 to 57
 
META FILEATTACHMENT attachment="PixelDiskDimensions.xlsx" attr="h" comment="" date="1378034470" name="PixelDiskDimensions.xlsx" path="PixelDiskDimensions.xlsx" size="22306" stream="PixelDiskDimensions.xlsx" tmpFilename="/usr/tmp/CGItemp18716" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-06-26_Burdin_Rings.pdf" attr="" comment="Sergey's initial talk introducing the 'concentric diskettes' layout" date="1378729666" name="2013-06-26_Burdin_Rings.pdf" path="2013-06-26_Burdin_Rings.pdf" size="336346" stream="2013-06-26_Burdin_Rings.pdf" tmpFilename="/usr/tmp/CGItemp18825" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-08-27_Jones_Lpool_Status.pdf" attr="" comment="Update from Liverpool, last half concerns the 'concentric diskettes' layout" date="1378729690" name="2013-08-27_Jones_Lpool_Status.pdf" path="2013-08-27_Jones_Lpool_Status.pdf" size="1295564" stream="2013-08-27_Jones_Lpool_Status.pdf" tmpFilename="/usr/tmp/CGItemp18893" user="JoleenPater" version="1"
Added:
>
>
META FILEATTACHMENT attachment="np49-04-17.stp" attr="h" comment="" date="1391698730" name="np49-04-17.stp" path="np49-04-17.stp" size="529175" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="np49-04-19.stp" attr="h" comment="" date="1391698739" name="np49-04-19.stp" path="np49-04-19.stp" size="413655" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="np49-04-21.stp" attr="h" comment="" date="1391698746" name="np49-04-21.stp" path="np49-04-21.stp" size="376710" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-11-OpenRings3D-simple.png" attr="" comment="" date="1391698988" name="2013-11-OpenRings3D-simple.png" path="2013-11-OpenRings3D-simple.png" size="189703" user="JoleenPater" version="1"
 
META TOPICMOVED by="JoleenPater" date="1376430153" from="ATLAS/PUUKA.WP2PixelDiskMechanics" to="ATLAS/PUUKA.EndcapLayoutAndEngineeringDesign"

Revision 132014-02-06 - JoleenPater

Line: 1 to 1
Added:
>
>

Sergey Burdin's "Concentric Diskettes" Endcap Layout

A couple of talks showing the basic idea: 2013-06-26_Burdin_Rings.pdf

and a later update with a more sophisticated layout: 2013-08-27_Jones_Lpool_Status.pdf.

Caculation of diskette sizes (J.Pater) using spreadsheet found below:

Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI -layout disks:

Physical outer radius of ring 2 modules: centres not corners - corners will extend further 315.2
Active outer radius of ring 2 modules: centres not corners 315.0 same as LoI
Active inner radius of ring 2 modules: centres not corners 274.6
Physical inner radius of ring 2 modules: centres not corners 274.4
Physical outer radius of ring 1 modules: centres not corners - corners will extend further 253.0
Active outer radius of ring 1 modules: centres not corners 252.7
active CENTRE of ring 2 modules 232.5
Active inner radius of ring 1 modules: centres not corners 212.3
Physical inner radius of ring 1 modules: centres not corners 212.1
Physical outer radius of ring 0 modules: centres not corners - corners will extend further 190.7
Active outer radius of ring 0 modules: centres not corners 190.5
Active inner radius of ring 0 modules: centres not corners 150.1 same as LoI
Physical inner radius of ring 0 modules: centres not corners 149.9
Number of modules per ring, rounded up to be divisible by 4 (front/back, left/right clamshell):

Ring 2: 60  
Ring 1: 48  
Ring 0: 36  
Jo's spreadsheet for calculating numbers of rings: PixelDiskDimensions.xlsx

BELOW HERE IS OLDER INFORMATION - may no longer be relevant

 
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Changed:
<
<		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
>
>		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
  The closest match to the requested dimensions are illustrated in the drawings above. These disks use 'quad' modules (modules built on 4 FEI4 chips in a 2x2 grid placement) and 'hex' modules (built on 6 chips in a 2x3 grid). Disks 1-4 would have the 'QHH' geometry shown in the leftmost picture ('QHH' for Quad-Hex-Hex as the innermost ring is made of quad modules and the middle and outer rings are made of hex modules). Disk 5 is QQH and Disk 6 is QH. This results in the dimensions shown in the table below:
Deleted:
<
<
z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0
 
Changed:
<
<		Dimensions assumed:
>
>
z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0
Dimensions assumed:
 
  • 0.45mm gap between adjacent FEI4s in a module
  • sensor dead edge 0.2mm radially
  • a hex module is 61.3mm long radially
Line: 17 to 34
 
LoI backup document

The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf

Changed:
<
<
Sergey Burdin's "Concentric Diskettes" Endcap Layout

A couple of talks showing the basic idea: 2013-06-26_Burdin_Rings.pdf

and a later update with a more sophisticated layout: 2013-08-27_Jones_Lpool_Status.pdf.

Caculation of diskette sizes (J.Pater) using spreadsheet found below:

Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI-layout disks:

Physical outer radius of ring 2 modules: centres not corners - corners will extend further 315.2
Active outer radius of ring 2 modules: centres not corners 315.0 same as LoI
Active inner radius of ring 2 modules: centres not corners 274.6
Physical inner radius of ring 2 modules: centres not corners 274.4



Physical outer radius of ring 1 modules: centres not corners - corners will extend further 253.0
Active outer radius of ring 1 modules: centres not corners 252.7
active CENTRE of ring 2 modules 232.5
Active inner radius of ring 1 modules: centres not corners 212.3
Physical inner radius of ring 1 modules: centres not corners 212.1



Physical outer radius of ring 0 modules: centres not corners - corners will extend further 190.7
Active outer radius of ring 0 modules: centres not corners 190.5
Active inner radius of ring 0 modules: centres not corners 150.1 same as LoI
Physical inner radius of ring 0 modules: centres not corners 149.9






Number of modules per ring, rounded up to be divisible by 4 (front/back, left/right clamshell):

Ring 2: 60  
Ring 1: 48  
Ring 0: 36  


Jo's spreadsheet for calculating numbers of rings

PixelDiskDimensions.xlsx

>
>
 
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 1-21" date="1360332434" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" size="10153992" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" tmpFilename="/usr/tmp/CGItemp8387" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 22 to end" date="1360332535" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" size="11543912" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" tmpFilename="/usr/tmp/CGItemp8390" user="JoleenPater" version="1"

Revision 122013-12-17 - AndrewPickford

Line: 1 to 1
 
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Changed:
<
<		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
>
>		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
  The closest match to the requested dimensions are illustrated in the drawings above. These disks use 'quad' modules (modules built on 4 FEI4 chips in a 2x2 grid placement) and 'hex' modules (built on 6 chips in a 2x3 grid). Disks 1-4 would have the 'QHH' geometry shown in the leftmost picture ('QHH' for Quad-Hex-Hex as the innermost ring is made of quad modules and the middle and outer rings are made of hex modules). Disk 5 is QQH and Disk 6 is QH. This results in the dimensions shown in the table below:
z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0

Revision 112013-09-09 - JoleenPater

Line: 1 to 1
 
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Line: 19 to 19
 The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf
Sergey Burdin's "Concentric Diskettes" Endcap Layout
Changed:
<
<		Caculation J.Pater using spreadsheet found below:
>
>		A couple of talks showing the basic idea: 2013-06-26_Burdin_Rings.pdf
 
Changed:
<
<		Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI-layout disks:
>
>		and a later update with a more sophisticated layout: 2013-08-27_Jones_Lpool_Status.pdf.

Caculation of diskette sizes (J.Pater) using spreadsheet found below:

 
Added:
>
>		Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI-layout disks:
 
Physical outer radius of ring 2 modules: centres not corners - corners will extend further 315.2
Active outer radius of ring 2 modules: centres not corners 315.0 same as LoI
Active inner radius of ring 2 modules: centres not corners 274.6
Physical inner radius of ring 2 modules: centres not corners 274.4



Physical outer radius of ring 1 modules: centres not corners - corners will extend further 253.0
Active outer radius of ring 1 modules: centres not corners 252.7
active CENTRE of ring 2 modules 232.5
Active inner radius of ring 1 modules: centres not corners 212.3
Physical inner radius of ring 1 modules: centres not corners 212.1



Physical outer radius of ring 0 modules: centres not corners - corners will extend further 190.7
Active outer radius of ring 0 modules: centres not corners 190.5
Active inner radius of ring 0 modules: centres not corners 150.1 same as LoI
Physical inner radius of ring 0 modules: centres not corners 149.9






Number of modules per ring, rounded up to be divisible by 4 (front/back, left/right clamshell):

Ring 2: 60  
Line: 49 to 52
 
META FILEATTACHMENT attachment="PrototypePipes.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461014" name="PrototypePipes.jpg" path="PrototypePipes.jpg" size="771748" stream="PrototypePipes.jpg" tmpFilename="/usr/tmp/CGItemp28643" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="MP12003_00_A2.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461245" name="MP12003_00_A2.jpg" path="MP12003_00 A2.jpg" size="271673" stream="MP12003_00 A2.jpg" tmpFilename="/usr/tmp/CGItemp28517" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PixelDiskDimensions.xlsx" attr="h" comment="" date="1378034470" name="PixelDiskDimensions.xlsx" path="PixelDiskDimensions.xlsx" size="22306" stream="PixelDiskDimensions.xlsx" tmpFilename="/usr/tmp/CGItemp18716" user="JoleenPater" version="1"
Added:
>
>
META FILEATTACHMENT attachment="2013-06-26_Burdin_Rings.pdf" attr="" comment="Sergey's initial talk introducing the 'concentric diskettes' layout" date="1378729666" name="2013-06-26_Burdin_Rings.pdf" path="2013-06-26_Burdin_Rings.pdf" size="336346" stream="2013-06-26_Burdin_Rings.pdf" tmpFilename="/usr/tmp/CGItemp18825" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="2013-08-27_Jones_Lpool_Status.pdf" attr="" comment="Update from Liverpool, last half concerns the 'concentric diskettes' layout" date="1378729690" name="2013-08-27_Jones_Lpool_Status.pdf" path="2013-08-27_Jones_Lpool_Status.pdf" size="1295564" stream="2013-08-27_Jones_Lpool_Status.pdf" tmpFilename="/usr/tmp/CGItemp18893" user="JoleenPater" version="1"
 
META TOPICMOVED by="JoleenPater" date="1376430153" from="ATLAS/PUUKA.WP2PixelDiskMechanics" to="ATLAS/PUUKA.EndcapLayoutAndEngineeringDesign"

Revision 102013-09-01 - JoleenPater

Line: 1 to 1
 
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Line: 17 to 17
 
LoI backup document

The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf

Added:
>
>
Sergey Burdin's "Concentric Diskettes" Endcap Layout

Caculation J.Pater using spreadsheet found below:

Using the same module dimensions given above, assuming the same active coverage as the quad-hex-hex LoI-layout disks:

Physical outer radius of ring 2 modules: centres not corners - corners will extend further 315.2
Active outer radius of ring 2 modules: centres not corners 315.0 same as LoI
Active inner radius of ring 2 modules: centres not corners 274.6
Physical inner radius of ring 2 modules: centres not corners 274.4



Physical outer radius of ring 1 modules: centres not corners - corners will extend further 253.0
Active outer radius of ring 1 modules: centres not corners 252.7
active CENTRE of ring 2 modules 232.5
Active inner radius of ring 1 modules: centres not corners 212.3
Physical inner radius of ring 1 modules: centres not corners 212.1



Physical outer radius of ring 0 modules: centres not corners - corners will extend further 190.7
Active outer radius of ring 0 modules: centres not corners 190.5
Active inner radius of ring 0 modules: centres not corners 150.1 same as LoI
Physical inner radius of ring 0 modules: centres not corners 149.9






Number of modules per ring, rounded up to be divisible by 4 (front/back, left/right clamshell):

Ring 2: 60  
Ring 1: 48  
Ring 0: 36  


Jo's spreadsheet for calculating numbers of rings

PixelDiskDimensions.xlsx

 
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 1-21" date="1360332434" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" size="10153992" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" tmpFilename="/usr/tmp/CGItemp8387" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 22 to end" date="1360332535" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" size="11543912" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" tmpFilename="/usr/tmp/CGItemp8390" user="JoleenPater" version="1"
Line: 32 to 48
 
META FILEATTACHMENT attachment="OneFoamWedge.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461000" name="OneFoamWedge.jpg" path="OneFoamWedge.jpg" size="1038221" stream="OneFoamWedge.jpg" tmpFilename="/usr/tmp/CGItemp28673" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PrototypePipes.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461014" name="PrototypePipes.jpg" path="PrototypePipes.jpg" size="771748" stream="PrototypePipes.jpg" tmpFilename="/usr/tmp/CGItemp28643" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="MP12003_00_A2.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461245" name="MP12003_00_A2.jpg" path="MP12003_00 A2.jpg" size="271673" stream="MP12003_00 A2.jpg" tmpFilename="/usr/tmp/CGItemp28517" user="JoleenPater" version="1"
Added:
>
>
META FILEATTACHMENT attachment="PixelDiskDimensions.xlsx" attr="h" comment="" date="1378034470" name="PixelDiskDimensions.xlsx" path="PixelDiskDimensions.xlsx" size="22306" stream="PixelDiskDimensions.xlsx" tmpFilename="/usr/tmp/CGItemp18716" user="JoleenPater" version="1"
 
META TOPICMOVED by="JoleenPater" date="1376430153" from="ATLAS/PUUKA.WP2PixelDiskMechanics" to="ATLAS/PUUKA.EndcapLayoutAndEngineeringDesign"

Revision 92013-08-13 - JoleenPater

Line: 1 to 1
 
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Changed:
<
<		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
>
>		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
  The closest match to the requested dimensions are illustrated in the drawings above. These disks use 'quad' modules (modules built on 4 FEI4 chips in a 2x2 grid placement) and 'hex' modules (built on 6 chips in a 2x3 grid). Disks 1-4 would have the 'QHH' geometry shown in the leftmost picture ('QHH' for Quad-Hex-Hex as the innermost ring is made of quad modules and the middle and outer rings are made of hex modules). Disk 5 is QQH and Disk 6 is QH. This results in the dimensions shown in the table below:
z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0
Line: 17 to 17
 
LoI backup document

The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf

Deleted:
<
<
Rectangular 3-quad Prototype

To put here:

- concept sketch

- assembly photos

- thermal camera photos and data

- liverpool and glasgow FEA results

Thermal FEA

To put here:

-

Single-row Halfdisk Prototype

Conceptual drawings:

Front.jpgBack.jpg

Engineering drawings:

ATLAS_Pixel_Single_-_Row_Half_Disk.jpgMP12003_00_A2.jpg

  • general outline / Cfibre face sheet
  • cooling pipe

Construction photographs:

GluingJig.jpgOneFoamWedge.jpgPrototype-sandwich.jpgPrototypePipes.jpg

  • vacuum jig
  • one foam wedge
  • wedges glued to facesheet
  • cooling pipe sample
Stepped Geometry Disk Sector

Peter Sutcliffe's drawings for a sector of a stepped-geometry disk:

Bus Tapes

The bus tape design from the pixel barrel is being adapted for disks by Yiorgos Sidiropoulos at Edinburgh. Details can be found in this presentation (in two parts, to beat twiki's 20MB upload limit):

Talks (in reverse chronological order ie newest first):
 
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 1-21" date="1360332434" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" size="10153992" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" tmpFilename="/usr/tmp/CGItemp8387" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 22 to end" date="1360332535" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" size="11543912" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" tmpFilename="/usr/tmp/CGItemp8390" user="JoleenPater" version="1"
Line: 78 to 32
 
META FILEATTACHMENT attachment="OneFoamWedge.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461000" name="OneFoamWedge.jpg" path="OneFoamWedge.jpg" size="1038221" stream="OneFoamWedge.jpg" tmpFilename="/usr/tmp/CGItemp28673" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PrototypePipes.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461014" name="PrototypePipes.jpg" path="PrototypePipes.jpg" size="771748" stream="PrototypePipes.jpg" tmpFilename="/usr/tmp/CGItemp28643" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="MP12003_00_A2.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461245" name="MP12003_00_A2.jpg" path="MP12003_00 A2.jpg" size="271673" stream="MP12003_00 A2.jpg" tmpFilename="/usr/tmp/CGItemp28517" user="JoleenPater" version="1"
Changed:
<
<
META TOPICMOVED by="JoleenPater" date="1375972204" from="ATLAS/PUUKA.EndcapDiskMechanics" to="ATLAS/PUUKA.WP2PixelDiskMechanics"
>
>
META TOPICMOVED by="JoleenPater" date="1376430153" from="ATLAS/PUUKA.WP2PixelDiskMechanics" to="ATLAS/PUUKA.EndcapLayoutAndEngineeringDesign"

Revision 82013-08-08 - JoleenPater

Line: 1 to 1
Deleted:
<
<
META TOPICPARENT name="Tasks"
 
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Revision 72013-08-08 - JoleenPater

Line: 1 to 1
 
META TOPICPARENT name="Tasks"
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Changed:
<
<		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
>
>		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
  The closest match to the requested dimensions are illustrated in the drawings above. These disks use 'quad' modules (modules built on 4 FEI4 chips in a 2x2 grid placement) and 'hex' modules (built on 6 chips in a 2x3 grid). Disks 1-4 would have the 'QHH' geometry shown in the leftmost picture ('QHH' for Quad-Hex-Hex as the innermost ring is made of quad modules and the middle and outer rings are made of hex modules). Disk 5 is QQH and Disk 6 is QH. This results in the dimensions shown in the table below:
z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0
Line: 38 to 38
  Conceptual drawings:
Changed:
<
<		Front.jpgBack.jpg
>
>		Front.jpgBack.jpg
  Engineering drawings:
Changed:
<
<		ATLAS_Pixel_Single_-_Row_Half_Disk.jpgMP12003_00_A2.jpg
>
>		ATLAS_Pixel_Single_-_Row_Half_Disk.jpgMP12003_00_A2.jpg
 
  • general outline / Cfibre face sheet
  • cooling pipe

Construction photographs:

Changed:
<
<		GluingJig.jpgOneFoamWedge.jpgPrototype-sandwich.jpgPrototypePipes.jpg
>
>		GluingJig.jpgOneFoamWedge.jpgPrototype-sandwich.jpgPrototypePipes.jpg
 
  • vacuum jig
  • one foam wedge
  • wedges glued to facesheet
Line: 79 to 79
 
META FILEATTACHMENT attachment="OneFoamWedge.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461000" name="OneFoamWedge.jpg" path="OneFoamWedge.jpg" size="1038221" stream="OneFoamWedge.jpg" tmpFilename="/usr/tmp/CGItemp28673" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PrototypePipes.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461014" name="PrototypePipes.jpg" path="PrototypePipes.jpg" size="771748" stream="PrototypePipes.jpg" tmpFilename="/usr/tmp/CGItemp28643" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="MP12003_00_A2.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461245" name="MP12003_00_A2.jpg" path="MP12003_00 A2.jpg" size="271673" stream="MP12003_00 A2.jpg" tmpFilename="/usr/tmp/CGItemp28517" user="JoleenPater" version="1"
Added:
>
>
META TOPICMOVED by="JoleenPater" date="1375972204" from="ATLAS/PUUKA.EndcapDiskMechanics" to="ATLAS/PUUKA.WP2PixelDiskMechanics"

Revision 62013-02-21 - JoleenPater

Line: 1 to 1
 
META TOPICPARENT name="Tasks"
Pixel Endcaps in the LoI (Cartigny) Layout
Line: 7 to 7
 Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg

The closest match to the requested dimensions are illustrated in the drawings above. These disks use 'quad' modules (modules built on 4 FEI4 chips in a 2x2 grid placement) and 'hex' modules (built on 6 chips in a 2x3 grid). Disks 1-4 would have the 'QHH' geometry shown in the leftmost picture ('QHH' for Quad-Hex-Hex as the innermost ring is made of quad modules and the middle and outer rings are made of hex modules). Disk 5 is QQH and Disk 6 is QH. This results in the dimensions shown in the table below:

Deleted:
<
<
 
z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0
Changed:
<
<		Module Dimensions assumed: (to add)
>
>		Dimensions assumed:
  • 0.45mm gap between adjacent FEI4s in a module
  • sensor dead edge 0.2mm radially
  • a hex module is 61.3mm long radially
  • a quad module is 40.85mm long radially
  • >0.2mm gap required between adjacent modules on a disk, to isolate HV
 
LoI backup document

The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf

Line: 32 to 36
 -
Single-row Halfdisk Prototype
Added:
>
>		Conceptual drawings:
 Front.jpgBack.jpg
Changed:
<
<
  • general outline and face sheet
  • curved cooling pipe
>
>		 Engineering drawings:

ATLAS_Pixel_Single_-_Row_Half_Disk.jpgMP12003_00_A2.jpg

  • general outline / Cfibre face sheet
  • cooling pipe

Construction photographs:

GluingJig.jpgOneFoamWedge.jpgPrototype-sandwich.jpgPrototypePipes.jpg

  • vacuum jig
  • one foam wedge
  • wedges glued to facesheet
  • cooling pipe sample
 
Stepped Geometry Disk Sector

Peter Sutcliffe's drawings for a sector of a stepped-geometry disk:

Line: 55 to 73
 
META FILEATTACHMENT attachment="Disk0-3_QHH_Halfdisk.jpg" attr="" comment="Quad-Hex-Hex (QHH) Halfdisk" date="1361377048" name="Disk0-3_QHH_Halfdisk.jpg" path="Disk0-3_QHH_Halfdisk.jpg" size="178779" stream="Disk0-3_QHH_Halfdisk.jpg" tmpFilename="/usr/tmp/CGItemp28473" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk4_MixedSizes.jpg" attr="" comment="Quad-Quad-Hex (QQH) disk" date="1361377278" name="Disk4_MixedSizes.jpg" path="Disk4_MixedSizes.jpg" size="159283" stream="Disk4_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28453" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk5_MixedSizes.jpg" attr="" comment="Quad-Hex (QH) disk" date="1361377311" name="Disk5_MixedSizes.jpg" path="Disk5_MixedSizes.jpg" size="140751" stream="Disk5_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28568" user="JoleenPater" version="1"
Added:
>
>
META FILEATTACHMENT attachment="Prototype-sandwich.jpg" attr="" comment="" date="1361460836" name="Prototype-sandwich.jpg" path="Prototype-sandwich.jpg" size="648940" stream="Prototype-sandwich.jpg" tmpFilename="/usr/tmp/CGItemp28534" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="ATLAS_Pixel_Single_-_Row_Half_Disk.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361460901" name="ATLAS_Pixel_Single_-_Row_Half_Disk.jpg" path="ATLAS Pixel Single - Row Half Disk.jpg" size="82391" stream="ATLAS Pixel Single - Row Half Disk.jpg" tmpFilename="/usr/tmp/CGItemp28365" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="GluingJig.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361460990" name="GluingJig.jpg" path="GluingJig.jpg" size="154503" stream="GluingJig.jpg" tmpFilename="/usr/tmp/CGItemp28562" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="OneFoamWedge.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461000" name="OneFoamWedge.jpg" path="OneFoamWedge.jpg" size="1038221" stream="OneFoamWedge.jpg" tmpFilename="/usr/tmp/CGItemp28673" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PrototypePipes.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461014" name="PrototypePipes.jpg" path="PrototypePipes.jpg" size="771748" stream="PrototypePipes.jpg" tmpFilename="/usr/tmp/CGItemp28643" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="MP12003_00_A2.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461245" name="MP12003_00_A2.jpg" path="MP12003_00 A2.jpg" size="271673" stream="MP12003_00 A2.jpg" tmpFilename="/usr/tmp/CGItemp28517" user="JoleenPater" version="1"

Revision 52013-02-20 - JoleenPater

Line: 1 to 1
 
META TOPICPARENT name="Tasks"
Changed:
<
<
LoI backup document
>
>
Pixel Endcaps in the LoI (Cartigny) Layout
 
Changed:
<
<		Jo's pixel disk backup document for the Phase-II Letter of Intent can be found here: [action Jo to add link]
Bus Tapes
>
>		The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.
 
Changed:
<
<		The bus tape design from the pixel barrel is being adapted for disks by Yiorgos Sidiropoulos at Edinburgh. Details can be found in this presentation (in two parts, to beat twiki's 20MB upload limit):
>
>		Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg

The closest match to the requested dimensions are illustrated in the drawings above. These disks use 'quad' modules (modules built on 4 FEI4 chips in a 2x2 grid placement) and 'hex' modules (built on 6 chips in a 2x3 grid). Disks 1-4 would have the 'QHH' geometry shown in the leftmost picture ('QHH' for Quad-Hex-Hex as the innermost ring is made of quad modules and the middle and outer rings are made of hex modules). Disk 5 is QQH and Disk 6 is QH. This results in the dimensions shown in the table below:

z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0

Module Dimensions assumed: (to add)

LoI backup document

The pixel disk backup document for the Phase-II Letter of Intent can be found here: http://cds.cern.ch/record/1515010/files/ATL-UPGRADE-PUB-2013-004.pdf

 
Rectangular 3-quad Prototype
Added:
>
>		To put here:

- concept sketch

- assembly photos

- thermal camera photos and data

- liverpool and glasgow FEA results

Thermal FEA

To put here:

-

 
S ingle-row Halfdisk Prototype

Front.jpgBack.jpg

  • general outline and face sheet
  • curved cooling pipe
Changed:
<
<
Stepped Geometry Disk
>
>
Stepped Geometry Disk Sector
  Peter Sutcliffe's drawings for a sector of a stepped-geometry disk:
Added:
>
>
Bus Tapes

The bus tape design from the pixel barrel is being adapted for disks by Yiorgos Sidiropoulos at Edinburgh. Details can be found in this presentation (in two parts, to beat twiki's 20MB upload limit):

Talks (in reverse chronological order ie newest first):
 
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 1-21" date="1360332434" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" size="10153992" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" tmpFilename="/usr/tmp/CGItemp8387" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 22 to end" date="1360332535" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" size="11543912" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" tmpFilename="/usr/tmp/CGItemp8390" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Front.jpg" attr="" comment="Sketch of front side of single-row half-disk prototype" date="1360340700" name="Front.jpg" path="Front.jpg" size="42973" stream="Front.jpg" tmpFilename="/usr/tmp/CGItemp8235" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Back.jpg" attr="" comment="Sketch of back side of single-row half-disk prototype" date="1360340732" name="Back.jpg" path="Back.jpg" size="43886" stream="Back.jpg" tmpFilename="/usr/tmp/CGItemp8107" user="JoleenPater" version="1"
Added:
>
>
META FILEATTACHMENT attachment="Disk0-3_QHH_Halfdisk.tiff" attr="" comment="Quad-Hex-Hex (QHH) Halfdisk" date="1361376790" name="Disk0-3_QHH_Halfdisk.tiff" path="Disk0-3_QHH_Halfdisk.tiff" size="96204" stream="Disk0-3_QHH_Halfdisk.tiff" tmpFilename="/usr/tmp/CGItemp28391" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk0-3_QHH_Halfdisk.jpg" attr="" comment="Quad-Hex-Hex (QHH) Halfdisk" date="1361377048" name="Disk0-3_QHH_Halfdisk.jpg" path="Disk0-3_QHH_Halfdisk.jpg" size="178779" stream="Disk0-3_QHH_Halfdisk.jpg" tmpFilename="/usr/tmp/CGItemp28473" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk4_MixedSizes.jpg" attr="" comment="Quad-Quad-Hex (QQH) disk" date="1361377278" name="Disk4_MixedSizes.jpg" path="Disk4_MixedSizes.jpg" size="159283" stream="Disk4_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28453" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Disk5_MixedSizes.jpg" attr="" comment="Quad-Hex (QH) disk" date="1361377311" name="Disk5_MixedSizes.jpg" path="Disk5_MixedSizes.jpg" size="140751" stream="Disk5_MixedSizes.jpg" tmpFilename="/usr/tmp/CGItemp28568" user="JoleenPater" version="1"

Revision 42013-02-08 - JoleenPater

Line: 1 to 1
 
META TOPICPARENT name="Tasks"
LoI backup document

Revision 32013-02-08 - JoleenPater

Line: 1 to 1
 
META TOPICPARENT name="Tasks"
Changed:
<
<		Jo's draft of a note to serve as the pixel disk backup document for the Phase-II Letter of Intent can be found here: [action Jo to add link]
>
>
LoI backup document

Jo's pixel disk backup document for the Phase-II Letter of Intent can be found here: [action Jo to add link]

Bus Tapes
  The bus tape design from the pixel barrel is being adapted for disks by Yiorgos Sidiropoulos at Edinburgh. Details can be found in this presentation (in two parts, to beat twiki's 20MB upload limit):
Added:
>
>
Rectangular 3-quad Prototype

S ingle-row Halfdisk Prototype
 
Changed:
<
<		Drawings and pictures of single-row half disk prototype
>
>		Front.jpgBack.jpg
 
  • general outline and face sheet
  • curved cooling pipe
Added:
>
>
Stepped Geometry Disk
  Peter Sutcliffe's drawings for a sector of a stepped-geometry disk:

META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 1-21" date="1360332434" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" size="10153992" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" tmpFilename="/usr/tmp/CGItemp8387" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 22 to end" date="1360332535" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" size="11543912" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" tmpFilename="/usr/tmp/CGItemp8390" user="JoleenPater" version="1"
Added:
>
>
META FILEATTACHMENT attachment="Front.jpg" attr="" comment="Sketch of front side of single-row half-disk prototype" date="1360340700" name="Front.jpg" path="Front.jpg" size="42973" stream="Front.jpg" tmpFilename="/usr/tmp/CGItemp8235" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="Back.jpg" attr="" comment="Sketch of back side of single-row half-disk prototype" date="1360340732" name="Back.jpg" path="Back.jpg" size="43886" stream="Back.jpg" tmpFilename="/usr/tmp/CGItemp8107" user="JoleenPater" version="1"

Revision 22013-02-08 - JoleenPater

Line: 1 to 1
 
META TOPICPARENT name="Tasks"
Deleted:
<
<		-- RichardBates - 2013-01-18
 \ No newline at end of file
Added:
>
>		Jo's draft of a note to serve as the pixel disk backup document for the Phase-II Letter of Intent can be found here: [action Jo to add link]

The bus tape design from the pixel barrel is being adapted for disks by Yiorgos Sidiropoulos at Edinburgh. Details can be found in this presentation (in two parts, to beat twiki's 20MB upload limit):

Drawings and pictures of single-row half disk prototype

  • general outline and face sheet
  • curved cooling pipe

Peter Sutcliffe's drawings for a sector of a stepped-geometry disk:

META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 1-21" date="1360332434" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_01-21.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" size="10153992" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_01-21.pdf" tmpFilename="/usr/tmp/CGItemp8387" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" attr="" comment="Yiorgos' slides on disk bus tape design: pages 22 to end" date="1360332535" name="25_01_13_Flex-tapes_for_the_ATLAS_pixel_Half_Disk_22-end.pdf" path="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" size="11543912" stream="25_01_13 Flex-tapes for the ATLAS pixel Half Disk_22-end.pdf" tmpFilename="/usr/tmp/CGItemp8390" user="JoleenPater" version="1"

Revision 12013-01-18 - RichardBates

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="Tasks"
-- RichardBates - 2013-01-18
View topic | History: r16 < r15 < r14 < r13 | More topic actions...
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback