(r18) GlaSiD < LinearCollider

LinearCollider Web>GlaSiD (revision 18) (raw view)~~EditAttach~~

---+ Glasgow SiD howto

The starting point is the *sidloi3* model in =lcgeo= implemented by F. Gaede and based on the original =sidloi3= compact file.
This was tested by simulating single muons and reconstructing them (see lcgeo/example/run_sid_reco.xml, or better: !SiDReconstruction.xml attached to this page: GlaSiDGettingStarted). <span><br /></span>

%TOC%

There is a 'getting started' guide at GlaSiDGettingStarted.

---++ Building the model

The model is using the generic detector drivers in DD4hep. For the calorimeters (Ecal/Hcal) the current (Oct 2015) CLIC drivers were used in order to have the !DDRec extensions that will eventually be needed by !DDMarlinPandora.

<img alt="full-SiD.png" height="348" src="%ATTACHURLPATH%/full-SiD.png" style="float: right;" width="400" />

To compile, from the local =lcgeo/= directory:

<verbatim>
source /cvmfs/sft.cern.ch/lcg/external/gcc/4.8.1/x86_64-slc6-gcc48-opt/setup.sh
export PATH=/cvmfs/sft.cern.ch/lcg/external/Python/2.7.4/x86_64-slc6-gcc48-opt/bin/:$PATH
export LD_LIBRARY_PATH=/cvmfs/sft.cern.ch/lcg/external/Python/2.7.4/x86_64-slc6-gcc48-opt/lib/:$LD_LIBRARY_PATH
make -C build -j4 install</verbatim>

To check the geometry:

<verbatim>
source ../config_dd4hep.sh
source ../dd4hep/bin/thisdd4hep.sh
source bin/thislcgeo.sh
geoDisplay SiD/compact/sidloi3/sidloi3_v00.xml</verbatim>

then from root prompt

<verbatim>
root [1] gGeoManager->CheckOverlaps(0.01);
Info in <TGeoNodeMatrix::CheckOverlaps>: Checking overlaps for world_volume and daughters within 0.01
Check overlaps:      [==========]  129404 [100.00 %]           01
Info in <TGeoNodeMatrix::CheckOverlaps>: Number of illegal overlaps/extrusions : 6</verbatim>

---++ Checking simulation+reconstruction chain

From =lcgeo=:

<verbatim>
source /cvmfs/ilc.desy.de/sw/x86_64_gcc48_sl6/v01-17-07/Marlin/v01-06/build_env.sh
Marlin example/run_sid_reco.xml</verbatim>

See GlaSiDGettingStarted for recent !SiDReconstruction.xml.
---++ Implementing custom SiD ECal drivers

The initial implementations uses =GenericCalBarrel_o1_v01= and =GenericCalEndcap_o1_v01= drivers. The generic drivers will build the main detection volumes but will not include detailed structural components and/or subcomponents (e.g. stacks, towers, gaps, support elements).  

<img alt="ecal.png" height="305" src="%ATTACHURLPATH%/ecal.png" style="float: right;" width="407" />

View with:

<verbatim>
geoDisplay SiD/compact/SiD_o1_v01/SiD_o1_v01.xml</verbatim>

Test with ECals only (other subdetectors commented in =SiD_o1_v01.xml=):

<verbatim>
root [0] gGeoManager->CheckOverlaps(0.01);
Info in <TGeoNodeMatrix::CheckOverlaps>: Checking overlaps for world_volume and daughters within 0.01
Check overlaps:      [==========] 3039 [100.00 %]           00:00
Info in <TGeoNodeMatrix::CheckOverlaps>: Number of illegal overlaps/extrusions : 0</verbatim>

Note that general ECal parameters are defined in =SiD_o1_v01.xml=, e.g.

<verbatim>
<constant name="EcalBarrel_half_length" value="1765.0*mm" />
<constant name="EcalBarrel_rmin" value="1265.0*mm" />
<constant name="EcalBarrel_rmax" value="1403.0*mm" />
<constant name="EcalBarrel_symmetry" value="12" /></verbatim>

etc., and used in =EcalBarrel_o1_v01_00.xml=.

---++ Repository

The development version of the code is located in =lcgeo/SiD/compact/SiD_o1_v01= in the [[https://svnsrv.desy.de/websvn/wsvn/General.ddsim/lcgeo][DESY SVN repo]], where the core DD4hep software and the CLIC and ILD models are stored as well. The naming convention for compact files is "DET_oX_vYY_ZZ.xml", e.g.  =EcalEndcap_o1_v01_00.xml=. %X% Use =svn cp DET.xm DET_oX_vYY_ZZ.xml= to rename compact files while preserving SVN history. The C++ drivers can be found in =lcgeo/detector/=.

---++ Adding HCal

Using the naming convention explained above, we add =HcalBarrel_o1_v01_00.xml= and =HcalEndcap_o1_v01_00.xml=. We also need to edit =SiD_o1_v01.xml= to add general HCal parameters. See the result [[%ATTACHURLPATH%/EcalHcalBarrel.png][here]]. Checked for illegal overlaps or extrusions and found none.

---++ Adding other subdetectors

Plugins and readouts are now included in the individual detector's XML descriptions to make the model more modular (i.e. so that one can comment out sub-detectors from =SiD_o1_v01.xml=, if necessary).

Both =LumiCal_o1_v01_00.xml= and =BeamCal_o1_v01_00.xl= use DD4hep default drivers and some overlaps between the default envelopes have to be solved. See result  [[%ATTACHURLPATH%/AllCals.png][here]].
Updated and tested =MuonBarrel_o1_v01_00.xml=, =MuonEndcap_o1_v01_00.xml= and =Solenoid_o1_v01_00.xml= were added (see table below).

The silicon trackers were updated and =SiTrackerBarrel_o1_v01_00.xml= and =SiTrackerEndcap_o1_v01_00.xml= were added to the SVN repo.

   <img alt="AllSiTrackersLumiCal.png" height="358" src="%ATTACHURLPATH%/AllSiTrackersLumiCal.png" style="float: right;" width="500" />

This is work in progress - watch this wiki (and the SVN repo) for updates.

   <img alt="StatusTable.png" height="353" src="%ATTACHURLPATH%/StatusTable.png" width="640" />

---++ Troubleshooting

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who	Comment
png	AllCals.png	r1	manage	40.6 K	2016-01-27 - 16:43	DanProtopopescu	All calorimeters
png	AllSiTrackersLumiCal.png	r2 r1	manage	213.7 K	2016-05-19 - 12:17	DanProtopopescu	All silicon trackers (Forward, Encap and Barrel) and LumiCal
png	EcalHcalBarrel.png	r1	manage	27.6 K	2016-01-13 - 16:44	DanProtopopescu	Ecal + barrel Hcal
tgz	SiDLoI3-compact.tgz	r1	manage	30.8 K	2015-12-15 - 11:30	DanProtopopescu	Initial XML configuration (Oct 2015) from SVN
pdf	SiDparSep2015Model.pdf	r1	manage	153.0 K	2015-12-15 - 11:21	DanProtopopescu	SiD engineering driver (Sep 2015)
png	StatusTable.png	r4 r3 r2 r1	manage	185.5 K	2016-05-19 - 10:36	DanProtopopescu	Implementation progress
png	def.png	r1	manage	11.7 K	2015-12-16 - 13:46	DanProtopopescu	Inner and outer radii definitions
png	ecal.png	r2 r1	manage	26.3 K	2015-12-15 - 16:13	DanProtopopescu	ECal modules only
png	full-SiD.png	r3 r2 r1	manage	149.1 K	2015-12-15 - 16:13	DanProtopopescu	Full sidloi3 model

Topic revision: r18 - 2016-07-11 - AidanRobson

LinearCollider