This page contains instructions for setting up and using a tool to parse text files and create ntuples containing the information in them.

Set up the environment

For initial setup:

source ~cdfsoft/cdf2.shrc

setup cdfsoft2 6.1.6.m

setup neurobayes_expert

setup root v5_26_00 -q GCC_3_4_6 -f Linux+2.6

cd /data/cdf04/stdenis/hww_1fb/hwwcdf6.1.6.mv4_81/

srt_setup -a

cd -

The command

hwwcdf6.1.6.mv4_81/Hww/TRTuple/root/testFillFlatFromAscii.sh

runs the program on a text file.

The code is executed via the command:

runFillFlatFromAscii teststeerFillFlatFromAscii.txt testFlatFillATLASl4vec.txt testFlatFillATLAS.root

The first argument is the steering file, the second is the text file you make and the third is the output root file.

The steering file should be pointed at the evinfo, global and variable tree to ntp definitions.

Test environment -- CDF Version

Copy the following files into a test area:

/data/cdf04/stdenis/hww_1fb/hwwcdf6.1.6.mv4_81/Hww/TRTuple/root/TreeSpecEv.txt

/data/cdf04/stdenis/hww_1fb/hwwcdf6.1.6.mv4_81/Hww/TRTuple/root/TreeSpecGlobal.txt

/data/cdf04/stdenis/hww_1fb/hwwcdf6.1.6.mv4_81/Hww/HwwMtuple/root/VariableTreeToNTP.txt

/data/cdf04/stdenis/hww_1fb/hwwcdf6.1.6.mv4_81/Hww/TRTuple/root/teststeerFillFlatFromAscii.txt

/data/cdf04/stdenis/hww_1fb/hwwcdf6.1.6.mv4_81/Hww/TRTuple/root/testFlatFillATLASl4vec.txt

Edit teststeerFillFlatFromAscii.txt so the three files have no directory spec:

GeneralParameter string 1 TreeSpecEv=TreeSpecEv.txt

GeneralParameter string 1 TreeSpecGlobal=TreeSpecGlobal.txt

GeneralParameter string 1 TreeToNTPMapFile=VariableTreeToNTP.txt

Now do:

setup neurobayes_expert

setup root v5_26_00 -q GCC_3_4_6 -f Linux+2.6

Now you can run the tool via the command

runFillFlatFromAscii teststeerFillFlatFromAscii.txt testFlatFillATLASl4vec.txt testFlatFillATLAS.root

Test environment -- ATLAS Version

Once the CDF test has been successfully completed, you can move on to building an ATLAS ntuple (with additional variables).

The relevant files can be found in:

/home/ahgemmell/NNFitter-00-00-09-Edited/NNTraining/run119

The directory specification in the files will need to be changed; if they are in the working directory, leave it out:

In teststeerFillFlatFromAscii.txt:

GeneralParameter string 1 TreeSpecEv=TreeSpecATLAStth-v15.txt
# Steering file with spec of global
GeneralParameter string 1 TreeSpecGlobal=TreeSpecATLAStth-v15.txt
# Variable tree to NTP
GeneralParameter string 1 TreeToNTPMapFile=VariableTreeToNTPATLASttHSemiLeptonic-v15.txt

Add the following lines:

GeneralParameter string 1 TreeNameEvInfo=D3PD
GeneralParameter string 1 TreeNameGlobalInfo=D3PD

It is necessary to match the variable names in the lines containing the string "EvInfoTree" in

VariableTreeToNTPATLASttHSemiLeptonic-v15.txt

to the names in the output file from the event generator.

Now the first problem I see is that the lepton inforamtion is not in EvInfoTree -- so you will need to try to figure out if it is available!

Then you wil have to add this to

VariableTreeToNTPATLASttHSemileptonic-v15.txt

I do find that

TreeSpecATLAStth-v15.txt

ListParameter SpecifyVariable:PL_SelLepton_Pt 1 Type:double
ListParameter SpecifyVariable:PL_SelLepton_Phi 1 Type:double
ListParameter SpecifyVariable:PL_SelLepton_Eta 1 Type:double

Note that the actual px,py,pz,e as you had are not there so you may have to make a new file with those variables.

Then you need to add the variable defintions to

VariableTreeToNTPATLASttHSemiLeptonic-v15.txt

Here is an example:

ListParameter EvInfoTree:28 1 PL_SelLepton_Pt:PL_SelLepton_Pt/PL_SelLepton_Pt:

o For each variable you add, you need to increment the number. So EvInfoTree:28 needs to goto EvInfoTree:29 for the next varaible.

o The value to the left of the : has to match your name in your text file that you write. This does no have to be the same as the stuff to the right. Later on this is used as the input variable to plotting and the neural net training. This however is your point where you are flexible in mapping the branch/leaf to that name of the varaible later.

o The stuff to the right of the : is the branch/leaf as it appears in root. In fact if you have a root file, Alistair wrote a tool to make this file from it.