Difference: EndcapLayout (6 vs. 7)

Revision 72013-08-08 - JoleenPater

Line: 1 to 1
 
META TOPICPARENT name="Tasks"
Pixel Endcaps in the LoI (Cartigny) Layout

The drawings below show 3 possible types of pixel endcap disks in the LoI, or "Cartigny" layout of the upgraded inner tracker. The original Cartigny layout called for six disks, at the z positions shown in the table below, with outer active radius of 315mm and inner active radii of 135mm (disks 1-4), 175mm (disk5) and 215mm (disk 6). These specifications can not be met exactly with the current module designs and assuming the simplest possible disk layout (shown below), where all modules are fixed directly to the front and back surfaces of a flat disk.

Changed:
<
<
Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
>
>
Disk0-3_QHH_Halfdisk.jpgDisk4_MixedSizes.jpgDisk5_MixedSizes.jpg
  The closest match to the requested dimensions are illustrated in the drawings above. These disks use 'quad' modules (modules built on 4 FEI4 chips in a 2x2 grid placement) and 'hex' modules (built on 6 chips in a 2x3 grid). Disks 1-4 would have the 'QHH' geometry shown in the leftmost picture ('QHH' for Quad-Hex-Hex as the innermost ring is made of quad modules and the middle and outer rings are made of hex modules). Disk 5 is QQH and Disk 6 is QH. This results in the dimensions shown in the table below:
z (mm) Rinner (active) (mm) Router (active) (mm)
822 150.1 315.0
960 150.1 315.0
1140 150.1 315.0
1360 150.1 315.0
1600 170.6 315.0
1890 212.4 315.0
Line: 38 to 38
  Conceptual drawings:
Changed:
<
<
Front.jpgBack.jpg
>
>
Front.jpgBack.jpg
  Engineering drawings:
Changed:
<
<
ATLAS_Pixel_Single_-_Row_Half_Disk.jpgMP12003_00_A2.jpg
>
>
ATLAS_Pixel_Single_-_Row_Half_Disk.jpgMP12003_00_A2.jpg
 
  • general outline / Cfibre face sheet
  • cooling pipe

Construction photographs:

Changed:
<
<
GluingJig.jpgOneFoamWedge.jpgPrototype-sandwich.jpgPrototypePipes.jpg
>
>
GluingJig.jpgOneFoamWedge.jpgPrototype-sandwich.jpgPrototypePipes.jpg
 
  • vacuum jig
  • one foam wedge
  • wedges glued to facesheet
Line: 79 to 79
 
META FILEATTACHMENT attachment="OneFoamWedge.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461000" name="OneFoamWedge.jpg" path="OneFoamWedge.jpg" size="1038221" stream="OneFoamWedge.jpg" tmpFilename="/usr/tmp/CGItemp28673" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="PrototypePipes.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461014" name="PrototypePipes.jpg" path="PrototypePipes.jpg" size="771748" stream="PrototypePipes.jpg" tmpFilename="/usr/tmp/CGItemp28643" user="JoleenPater" version="1"
META FILEATTACHMENT attachment="MP12003_00_A2.jpg" attr="" comment="single-row half-disk cooling pipe" date="1361461245" name="MP12003_00_A2.jpg" path="MP12003_00 A2.jpg" size="271673" stream="MP12003_00 A2.jpg" tmpFilename="/usr/tmp/CGItemp28517" user="JoleenPater" version="1"
Added:
>
>
META TOPICMOVED by="JoleenPater" date="1375972204" from="ATLAS/PUUKA.EndcapDiskMechanics" to="ATLAS/PUUKA.WP2PixelDiskMechanics"
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback